8295

Cranked Bands with Pins

- Available in 12", 18", 24", and 36" lengths
- Strong conventional design
- Ideally suited for either flush mount or on inside of fence post or door jamb

Length of Band	Pin Diameter	Black Powder Coat Over Galvanized (BPPCG)		Hot Dipped Galvanized
inches	inches	Product Code	Price	Product Code	Price
12	1/2	8295-12SP	$74.00	8295-122	$46.00
18	5/8	8295-18SP	$103.00	8295-182	$72.00
24	5/8	8295-24SP	$135.00	8295-242	$90.00
36	3/4	8295-36SP	$246.00	8295-362	$175.00

Hinges sold in pairs. Black powder coated hinges come with black stainless steel 2 inch #12 screws. No screws provided with galvanized hinges. Carriage bolts are not included as the length required will vary with the installation. Black touch up paint for bolt heads is available at Touch Up Paint

Please Note: This style of hinge has a loose fin on the pin. This slackness will not be evident when both hinges are mounted.

BPPCG = Black Polyester Powder Coat over hot dipped Galvanized.

What Size Hinge to Use?

The rule of thumb for determining the size to use is the band should be about one quarter to one third the width of the gate or door. If the gate or door is over six feet high then a third hinge should be utilized (one hinge for every three feet of height).

Download Hinge Section of 2010 Catalog

Installation Instructions

To view/print PDF documents, you must have Adobe Acrobat Reader. Adobe Acrobat Reader is free and can be downloaded from the Adobe web site. Download Adobe Acrobat Reader.

8295.pdf Instructions for 12", 18", 24", and 36" Cranked bands with pins